![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
<-- back to AUS brochures <-- back to B310 Brochures
Title: THE LIGHTWEIGHT HEAVIES [B310 panel van & 1200 pickup carrying large tyre]
1982.12 commercial vehicles: VB310 & B120 B120
Format:4 page booklet Size:A4 (210 x 297 mm) Publication Number:12 82/DPR 1663/4M
Comments? Questions? More photos or info? Reply to main forum: POST Brochures wanted
Contents |
cover
THE LIGHTWEIGHT HEAVIES.
TAKING THE HIGH COST OUT OF TRUCKING.
NISSAN DATSUN
van
1200cc SUNNY VAN. [B310 panel van]
ute
1200cc 1/2 TONNE UTILITY.With their steel sides, the GVM of 1315kg belies their toughness. These utes can mix it up with the best of them. And when it comes to economy, there's nothing to touch them.
specifications
SUNNY VAN SPECIFICATIONS
DATSUN 1200 UTE SPECIFICATIONS
Printing Date: Dec. 1982/12 82/DPR 1663/4M
NISSAN DATSUN
Nissan Motor Company (Australia) Pty. Ltd.
SUNNY VAN SPECIFICATIONS
Standard Equipment Laminated windscreen AM push button radio Side window demist vents Front inertia reel seat belts Individually reclining front bucket seats with head-restraints Steel radial tyres Loop pile carpet — passenger compartment Left and right hand side exterior mirrors Day/Night rear view mirror Fingertip control stalks for wiper/ washer, lights, headlight flasher, indicators, lane change Quartz clock Centre console Tripmeter Bi-level flow through ventilation system with three speed fan Illuminated heater controls, cigarette lighter, ashtray Hazard flashers Passenger side package tray Lockable fuel flap Armrests on doors Passenger grab handle Door operated courtesy light Rear load area floor mat Full headlining in load area
Instrumentation Speedometer with odometer and tripmeter Quartz clock Fuel gauge Temperature gauge Warning lights for: - Highbeam - Brake fluid level - Park brake -Oil pressure - Alternator charge -Choke
Engine Type A12, 4 cyl. O.H.V. Bore x Stroke: 73x 70mm Displacement: 1171cc Compression Ratio: 9:1
Transmission 4 speed all synchro floor change Gear ratios: 1st 3.757:1, 2nd 2.169:1, 3rd 1.404:1, Top 1:1. Reverse 3.64:1. Final drive ratio: 3.889:1.
Suspension Front: Independent struts with coil springs, stabiliser bar and double acting hydraulic shock absorbers Rear: Leaf springs
Wheels and Tyres Wheels: 4.5J x 13 Steel disc Tyres: 155SR 13 steel belted radials
Fuel System Carburettor: 2 barrel downdraft Fuel pump: Mech. Diaphragm Tank capacity: 47 litres
Steering Type: Recirculating ball Ratio: 16.4:1 Turning circle: 10m wall to wall Turns, lock to lock: 3.5
Electrical System 12 volt Maintenance free Battery: 40 amp/hour Alternator: 35 amp
Cooling System Radiator: Pressurized Thermostat: Pellet type Water pump: Centrifugal
Dimensions (Nominal) Wheel base: 2340 mm Front track: 1300 mm Rear track: 1300 mm O/All length: 3985 mm O/All width: 1580 mm O/All height: 1395 mm Ground clearance: 152 mm GVM: 1375kg Kerb weight: 830kg Total carrying capacity: 545kg*
Brakes Power assisted dual circuit hydraulic brakes with rear pressure proportioning valve Front: Disc Rear: Drums with leading and trailing shoes
DATSUN 1200 UTE SPECIFICATIONS
Engine Cylinders: 4 in-line, water cooled 4 cycle O.H.V. Displacement: 1171cc Bore and Stroke: 73.0x70.0mm Compression Ratio: 9.0:1
Fuel System Tank Capacity: 37 litres Fuel Pump: Mech. Diaphragm Carburettor: Dual Barrel, downdraft type Air Cleaner: Paper Element
Cooling System Pressurized radiator, 4 blade fan Pump Type: Centrifugal
Electrical System Maintenance free Battery: 12 Volt 40 A.H. Alternator: 35 amps Starter: 12V magnetic shift
Clutch Type and size: 180 mm Single Dry/Disc with diaphragm spring
Transmission 4 forward speeds, all synchromeshed Gear Ratios: 1st 3.76, 2nd 2.17, 3rd 1.40, 4th 1.00, Rev. 3.64
Steering Recirculating ball type Gear Ratio: 15.1:1 Turns lock to lock: 3.3
Brake System Hydraulic service drum brakes with tandem master cylinder Front: Two leading shoes Rear: Leading and trailing shoes. Parking brake mechanically operated on rear wheels
Suspension Front: Independent strut with coil springs, tension rods and stabilizer bar Rear: Semi-elliptic leaf springs with telescopic double acting shock absorbers Differential ratio: 4.111
Wheels & Tyres Wheels: Five 4J x 12 steel Tyre Sizes: Front: 5.00 x 12 x 4 ply rating. Rear: 5.00 x 12 x 8 ply rating
Dimensions/Weights Lengths: Wheel base 2300 mm. Front overhang 605 mm. Rear overhang 925 mm. Rear deck max. floor length 1670 mm. Overall length 3845 mm Widths: Front track 1250 mm. Rear track 1245 mm. Rear deck inside width 1285 mm Width between rear wheelarches 980 mm. Tailgate aperture width 1160 mm Overall width (excl. mirrors) 1495 mm Heights: Rear deck depth 410 mm. Rear deck loading height (unladen) 595 mm. Minimum ground clearance (unladen) 160 mm. Overall height 1395 mm Turning circle diameter: Wall to Wall 8.2 m Weights: Gross front axle 444 kg. Gross rear axle 871 kg. Gross vehicle mass 1315 kg. Kerb mass 720 kg. Total carrying capacity: 595 kg*
Standard Equipment Individual seats with head restraints Laminated windscreen 2 speed fan boosted heater demister Collapsible steering column with lock Retractable lap sash seat belts Colour keyed passenger car-type interior Flow through ventilation Reversible key for door and petrol locking cap Electrically operated windscreen washers Interior armrests 2 speed electric windscreen wipers Cigarette lighter Electric clock Centre console Hazard warning flashers Driver's door courtesy light Outside rear vision mirrors Two sunvisors Rear window protection bars Opening quarter vent windows Rear rubber bumperettes Tool kit
Instruments Speedometer, odometer with tenths. Gauges for fuel level and water temperature. Warning lights for oil pressure, battery charge, high-beam, park brake, brake fluid level
- Includes driver and passenger
All illustrations, information and specifications presented and referred to in this brochure were correct at the time when the brochure was approved for printing, however Nissan Motor Company (Australia) Ply. Ltd. and/or Motor Manufacturing Company (Australia) Pty. Ltd. reserve(s) the right, subject to the laws of Australia and/or any applicable State or Territory thereof and/or the regulations of any competent Authority which may apply from time to time, at their or its discretion at any time and without prior notice to discontinue or change the models, features, specifications, designs and prices of the products referred to in this brochure and any optional equipment therefore without incurring any liability whatsoever lo any purchaser or prospective purchaser of any of such products. All capacities, measurements, dimensions and weights quoted in this brochure are approximate only. Some of the items referred to herein are optional at extra cost. Some options may be required in combination with other options. Always consult your Datsun Dealer for the latest information on models, specifications, features, prices, options and availability.