![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 09:45, 10 January 2012 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 07:18, 15 November 2012 ddgonzal (Talk | contribs) (->A-series Usage) Next diff -> |
||
| Line 25: | Line 25: | ||
| B210 NORTH AMERICA Type D40/D41 not used. | B210 NORTH AMERICA Type D40/D41 not used. | ||
| + | |||
| + | = L-Series = | ||
| + | Does not interchange with A-series. Shaft has tang-drive. | ||
| + | |||
| + | == Japan == | ||
| + | 510 | ||
| + | 1967-1969 | ||
| + | 22100-21000 D411-57 <> 22100-21005 | ||
| + | 22100-21005 D411-57K ISO | ||
| + | 22100-21006 D411-59K ISO > 22100-21005 | ||
| + | 22100-21007 D411-57K ISO <> 22100-21006 | ||
| + | |||
| + | == USA == | ||
| + | 510 | ||
| + | |||
| + | L13 | ||
| + | 22100-H5900 D411-59K ISO <> 22100-21007 | ||
| + | 22100-21007 D411-59K ISO 0769- <> 22100-21006 | ||
| + | 22100-21006 D411-59K ISO <> 22100-21005 | ||
| + | 22100-21005 D411-57K ISO <> 22100-21000 | ||
| + | 22100-21000 | ||
| + | |||
| + | CRANK | ||
| + | 22100-23005 D410-58K ISO <> 22100-23000 | ||
| + | 22100-23000 CRANK | ||
| + | |||
| + | OPTION | ||
| + | 22100-A2300 D410-58F W/SHIELD COVER OP | ||
Revision as of 07:18, 15 November 2012
Hitachi D40/D41 type distributor was used by Datsun 1200. It has the smaller 70mm I.D. cap. This type was used by Datsun B10, L-series and many other Datsun engine families. A14 did not use this type.
Contents |
A-series Usage
B110 See Distributor for list of part numbers.
B10 JDM 22100-18001 ASS'Y-DISTRIBUTOR (D412-53) ALL (ex. coupe) 22100-18005 ASS'Y-DISTRIBUTOR (D412-53K ISO) ALL (ex. coupe) 22100-18006 ASS'Y-DISTRIBUTOR (D412-53K) ALL (ex. coupe) * replaced earlier 22100-25700 ASS'Y-DISTRIBUTOR (D412-57) Coupe 22100-25705 ASS'Y-DISTRIBUTOR (D412-57K ISO) Coupe 22100-25706 ASS'Y-DISTRIBUTOR (D412-57K) Coupe
B210 JDM 22100-H5010 DISTRIBUTOR-ASSY (MITSUBISHI T3T03571) A12S 22100-H5000 DISTRIBUTOR-ASSY (HITACHI D411-89) A12S 22100-H5710 DISTRIBUTOR-ASSY (MITSUBISHI T3T03572) A12T 22100-H5700 DISTRIBUTOR-ASSY (HITACHI D412-91) A12T 22100-G1600 DISTRIBUTOR-ASSY (HITACHI D411-A3) A12S.V 1975-
B210 NORTH AMERICA Type D40/D41 not used.
L-Series
Does not interchange with A-series. Shaft has tang-drive.
Japan
510 1967-1969 22100-21000 D411-57 <> 22100-21005 22100-21005 D411-57K ISO 22100-21006 D411-59K ISO > 22100-21005 22100-21007 D411-57K ISO <> 22100-21006
USA
510
L13 22100-H5900 D411-59K ISO <> 22100-21007 22100-21007 D411-59K ISO 0769- <> 22100-21006 22100-21006 D411-59K ISO <> 22100-21005 22100-21005 D411-57K ISO <> 22100-21000 22100-21000
CRANK 22100-23005 D410-58K ISO <> 22100-23000 22100-23000 CRANK
OPTION 22100-A2300 D410-58F W/SHIELD COVER OP