![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 03:42, 5 April 2014 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 07:02, 5 April 2014 ddgonzal (Talk | contribs) Next diff -> |
||
| Line 2: | Line 2: | ||
| The calipers are from: | The calipers are from: | ||
| + | EUROPE | ||
| + | * B11 Sunny | ||
| + | * B12 Sunny | ||
| + | * N12 Cherry | ||
| + | * N13 Sunny | ||
| JAPAN | JAPAN | ||
| * B11 Sunny | * B11 Sunny | ||
Revision as of 07:02, 5 April 2014
Nissan calipers 41001-05A90 (right) and 41011-05A90 (left)
The calipers are from:
EUROPE * B11 Sunny * B12 Sunny * N12 Cherry * N13 Sunny JAPAN * B11 Sunny * B12 Sunny * G20 S-Cargo * M10 Prairie S5 * N12 Pulsar * N13 Langley USA * 1982-1990 Nissan B11/B12 (Sentra/Sunny) * 1983-1990 Nissan Pulsar N12/N13
Wreckers are full of these, but re-manufactured are only $21 each. Make sure you get the brackets with the calipers.
NOTE: These are Japan-built models all (Tokico, etc), so Australia PBR-equipped are not the same.
B110: caliper cylinder 1.894" KN13: caliper cylinder 1.893" (48mm)
KN13 USA Catalog CA <-- Not this * 41001-02Y00 0887-0989 CA18D * 41001-58A01 0986-0887 CA16D This <-- * 41001-05A90 GA15, E16 ** superceded 41001-61A01 *** superceded 41001-62A01 * 1982-1988 B11 * 1986-1989 B12 * 1988-1989 KN13 except CA engines * 1983-1985 N13 RockAuto (1990 Pulsar NX SOHC Type) * BECK/ARNLEY 0770371S Left * BECK/ARNLEY 0770372S Right * Centric 14142048 Left * Centric 14242047 Right
Caliper Specs
Takes pad FMSI type D275/D233 130mm caliper bolt spacing