Revision as of 01:36, 2 July 2011 ddgonzal (Talk | contribs) (->Stem Oil Seal) <- Previous diff |
Revision as of 05:47, 10 July 2011 ddgonzal (Talk | contribs) (->Retainers) Next diff -> |
||
Line 12: | Line 12: | ||
* 7 degree angle | * 7 degree angle | ||
* SEALED POWER Part # VK215 | * SEALED POWER Part # VK215 | ||
- | * BECK/ARNLEY Part # 0230045 | + | * BECK/ARNLEY Part # 0230045 |
+ | |||
+ | |||
+ | Interchange | ||
+ | * 1976-1979 Buick Opel/Isuzu 1.8 | ||
+ | * 1976-1978 Chevrolet Luv/Isuzu 1.8 | ||
+ | * 1981-1995 Isuzu, various models | ||
+ | * 1988-1996 Honda/Isuzu 2.6 | ||
+ | * Datsun A-series | ||
+ | * Datsun L-series 4 and 6 | ||
+ | * Datsun Z-series | ||
= Specifications = | = Specifications = |
Revision as of 05:47, 10 July 2011
Datsun 1200 uses traditional 8mm stem diameter poppet valves.
Contents |
Stem Oil Seal
See main article: Valve Seals
Retainers
Valve Spring Retainer Keeper (Valve lock)
- Stem diameter 0.252
- 7 degree angle
- SEALED POWER Part # VK215
- BECK/ARNLEY Part # 0230045
Interchange
- 1976-1979 Buick Opel/Isuzu 1.8
- 1976-1978 Chevrolet Luv/Isuzu 1.8
- 1981-1995 Isuzu, various models
- 1988-1996 Honda/Isuzu 2.6
- Datsun A-series
- Datsun L-series 4 and 6
- Datsun Z-series
Specifications
- Intake valve head diameter: 35 mm
- Exhaust valve head diameter: 29 mm
- Stem diameter: 8 mm
- Overall length: 103.80 mm
- Seat angle: 45 degrees
- Head style: standard
- Stem end: NG
Part Numbers
- 13201-H1000 VALVE-INTAKE [35mm]
- 13202-18000 VALVE-EXHAUST [29mm]
- 13201-H2300 VALVE-INTAKE A12GX [35mm]
- 13202-H2300 VALVE-EXHAUST A12GX [29mm]
Valve Guides
•13212-H0112 GUIDE-VALVE INTAKE $8.08 •13213-H0113 GUIDE-VALVE EXHAUST $8.25
They have a little snap ring to limit the depth inserted in into the head
Others
For other A-series valves (A14, etc) and for competition valves, see: A-series_Cylinder_Heads#Valve_sizes