![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 21:15, 6 January 2012 ddgonzal (Talk | contribs) (->Overview) <- Previous diff |
Revision as of 21:16, 6 January 2012 ddgonzal (Talk | contribs) (->Overview) Next diff -> |
||
| Line 10: | Line 10: | ||
| * This is not a Hitachi carburetor, but is close. | * This is not a Hitachi carburetor, but is close. | ||
| - | * Advertised as 16010-H1602, which is USA part number, but the photo matches the JDM 16010=H1000 more closely than the USA version, except that it has a plug where the Anti-Diesel valve goes (which is only on 1973-up USA carburetors). | + | * Advertised as 16010-H1602, which is USA part number, but the photo matches the original 16010-H1000 more closely than the USA version, except that it has a plug where the Anti-Diesel valve goes (which is only on 1973-up USA carburetors). |
| * The jets are not stamped with an ID number | * The jets are not stamped with an ID number | ||
Revision as of 21:16, 6 January 2012
Chinese-made "16010-H1602" clone of Hitachi DCG306 carburetor for Datsun 1200. They have been sold on eBay and also by Bprojects.
Overview
Minimum order 100 quantity
- This is not a Hitachi carburetor, but is close.
- Advertised as 16010-H1602, which is USA part number, but the photo matches the original 16010-H1000 more closely than the USA version, except that it has a plug where the Anti-Diesel valve goes (which is only on 1973-up USA carburetors).
- The jets are not stamped with an ID number
Review
thomen said:
16 January 2011a much better improvement over the old [worn out] one! just had to swap my choke cable round to the other side and done! ...
the one I bought (i posted about it in this post) and fitted is not running right.. mechanic has said it might be the float or jet setup... is not running right... I'm not sure
15 March 2011
Comparision with H1000
