![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
An air dam or "lip" fits under the front of the car, preventing most air from traveling under it. Sometimes it is called an air spoiler, but true spoilers are usually fitted to the rear. Air dams were part of the Datsun 1200 FIA homologation.
Contents |
Overview
Preventing airflow under the car reduces pressure and parasitic drag on the under side. The result is less drag and less lift at the front of the car.
Classic old-school air dam "front spoiler"
Also see: Spoiler (rear spoiler and wings)
Modern air dam with brake ductwork
Classic "chin spoiler" air dams
Tomei Spoiler
Unknown brand
TS Cup B310-type
スポイラー
Materials
Most air dams are made out of wikipedia:fiberglas. Modern ones are made out of wikipedia:ABS plastic.
aluminum air dam
Donor Parts
Stanza donor
Canberra Car Styling
2/ 168 Gladstone St Fyshwick ACT 2609
phone: (02) 6280 6020
Designed by Bob Hall
Steven Draheim makes these fibreglass parts for 1200's
Tomei
TS Cup style
Mira
The most popular OEM air dam to fit a Datsun 1200 is a Daihatsu Mira part. The first person who was discovered, has been handed down and privateer group "Red Shimizu's MFP" (ＭＦＰのレッド清水さん).
Mira front bumber: the earlier models 1990-1998 L200/201 series and the Mira TR XX are the sporter version that has a lip and side skirts etc. also i noticed there are a couple of different types, one has a rounder mouth like the pic and also one that is just a straight rectangle mouth.
Cut where the red line is and go from there, trim another inch or two until your indicators sit flush with the mira indicators slots. If i didn't 14" rims that wide then i wouldn't of had to trim the sides to much which looked better. Keep the grille if you can, mine was already broken so had to cut it out. Mira TR-XX has a better bumper more square and lip kicks out
Daihatsu Mira L200
USA version
Australia Mira XX version
S63 Mira bumper with integrated air spoiler
Golf
Shallow splitter
Deep dam
Photo Index
