User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Engine Mounts

Revision as of 02:05, 27 November 2009; view current revision
<-Older revision | Newer revision->

Datsun 1200 encyclopedia | Recent changes | Edit this page | Page history | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision

20928.jpg Insulator


Contents

B110 and B120

Front: 1970-1973 1200 engine tall crossmember (B110/B120)
13676.jpg
Rear: 1974-up 1200 tall/short engine crossmember

Not only does the new-style engine have a lower mount, but the mount is further back about 1.5 inch. These photos shows how far back:
7976.jpg Photo-0283-1.jpg

Original B110 engine brackets:
right side (high-mount)



Two types of right-side brackets
20923.jpg


NOTE: If you mix early engine with late crosmember (or vice-versa) you need some modications. In this case see A-series Engine Swaps.


Early Engine Mounting

1970-1973 Datsun 1200

20925.jpg
NOTE: This Nissan diagram incorrectly shows both as stepped brackets. In fact the right side mount is flat on the engine side.


  • 11223-H1000 INSULATOR-engine mounting, front [10 mm studs] $12.70 USD
    20929.jpg
  • 11221-H1000 BRACKET-engine mounting, front (R.H.)
    562.gif 20943.jpg
  • 11222-H1000 BRACKET-engine mounting, front (L.H.)
    • Stepped mounting. Lower boss is farther out than upper boss
    14950.jpg 209.JPG 20942.jpg

Late Engine Mounting

1974 and up engines are different, and 1974-up 1200s use a corresponding crossmember
20924.jpg

  • 11223-H5000 INSULATOR-ENGINE MOUNTING, FRONT 7510-8503 [8mm studs]
  • 11223-G1900 INSULATOR-ENGINE MOUNTING, FRONT 8504- [8mm studs]
    20928.jpg


  • High side mount (similar to earlier)
  • 11221-H5000 BRACKET-ENGINE MOUNTING, RH 7510-8503
  • 11221-G1900 BRACKET-ENGINE MOUNTING, RH 8504-
  • 2563.jpg


  • Low side mount (new crossmembers)
  • 11222-H5001 BRACKET-ENGINE MOUNTING, LH 7510-8503
    • Same part for 74-up B120 (ute), B210 and B310
    2564.jpg
  • 11222-G1900 BRACKET-ENGINE MOUNTING, LH 8504-


B10 Mounts

As you can see these are different from newer (B110, etc) mounts.

  • 11223-18001 INSULATOR-engine mounting front
    18305.jpg
  • 11121-18000 BRACKET-engine mounting front (R.H.)
    • stepped bracket - looks similar to B110 LH bracket
    2569.jpg
  • 11122-18000 BRACKET-engine mounting front (L.H.)
  • flat (unstepped) bracket

B210 Mounts

20926.jpg

  • 11223-H5000 INSULATOR-ENGINE MOUNTING FRONT V [? mm studs]
  • 11223-H7300 INSULATOR-ENGINE MOUNTING FRONT USA 0974- [? mm studs, A14 engine softer mounts] $30.47 USD
    • replaces 11223-H7500
    • replaces 11223-H6100 INSULATOR-ENGINE MOUNTING FRONT USA -0874 [? mm studs, A13 engine harder mounts]
  • 11223-H7500 INSULATOR-ENGINE MOUNTING FRONT [except] V [10 mm studs]


  • 11221-H7301 BRACKET-ENGINE MOUNTING, FRONT RH
    • USA -0777
    • USA 11221-H5000 BRACKET-ENGINE MOUNTING FRONT RH -0874
    20517.jpg
    • USA 11121-H7300 BRACKET-ENGINE MOUNTING FRONT RH 0974-1074
  • USA 11221-H8500 BRACKET-ENGINE MOUNTING FRONT RH 0877-
    • Bracket notched for Reduction Gear Starter?


  • 11222-H5001 BRACKET-ENGINE MOUNTING, FRONT LH
    20516.jpg

B310 Mounts

The B310 insulators have a metal wrap in case the rubber breaks, the engine won't move too far.

20927.jpg


  • 11223-H9100 INSULATOR-ENGINE MOUNTING FRONT RH [10 mm studs] $34.38 USD
  • 11224-H9100 INSULATOR ASSY-ENGINE MOUNTING FRONT LH $44.32 USD
    4689.jpg
  • B310 insulators have a larger studs and locating pins, but otherwise are the same dimensions as B110 mounts.


  • 11221-H8500 BRACKET-ENGINE MOUNTING, FRONT RH
  • stronger, more rigid than ever - perhaps to reduce NVH (noise, vibration and harshness)
    20930.jpg 20935.jpg


  • 11222-H5001 BRACKET-ENGINE MOUNTING, FRONT LH
    • Same as B210 and mid-model B120
    16679.jpg 20936.jpg

Left and Right together
20934.jpg

Upgraded Insulators

6215.jpg

  • "These are the heavy duty engine mounts we were talking about. Broken engine mounts are a common thing in rally cars and this fixes the problem. Mounts are polyurethane and come out of a ford cortina and last for years of competition...Part number MT8156N. Kelpro make them...I usually just go to a good parts place and ask for cortina engine mounts and this is what they give me. Maybe there are two types, these are about 70mm in dia."


904.jpg


keywords マウント エンジン マウンテング