Main Menu

Home News Forum Photo Album Tech Wiki Downloads Web Links Polls FAQ Members Map

Fast Search

Slow Search

Google Ad

The exterior fenders bolt to the inner Hood Ledge pieces, which are welded to the chassis rails at the bottom. The rear if the ledges are welded to the Cowl and at the front to the radiator Core Support, completing the box-like structure of the front sheet metal (the Engine Bay). And as you might guess, the bonnet (hood) lies just above the top edges of the Hood Ledge.

[edit]

Fenders

guards, wings

Main: Fenders

[edit]

Hood Ledge

Ledge with Tower | 12 - Hood Ledge Front Body Panels Part Numbers
Album 19189

Original (Engine Room Side Panel Assembly)
* 64100-H1000 HOOD LEDGE ASS'Y (R.H.)
* 64101-H1000 HOOD LEDGE ASS'Y (L.H.)

From 1271 - updated to accommodate tandem brake master cylinder
* 64100-H3100 HOOD LEDGE ASS'Y (R.H.)

From 0772
* 64100-H7000 HOOD LEDGE ASS'Y (R.H.)
* 64101-H7000 HOOD LEDGE ASS'Y (L.H.)

In these photos, you can see how the hoodledge panels (which incorporate the strut towers) form the sides of the engine compartment:
Post 446905 Post 446905 Post 446905 Album 4665

Strut Towers are welded to the hood ledge (but sold as one piece, not taken apart like this)
Album 19385

[edit]

Hood Ledge Reinforcement

* 64118-H1000 REINF-HOODLEDGE,UPPER,RH (from '70-Sep)
  superceded 64120-H1000 REINF-HOODLEDGE,UPPER,RH
* 64121-H1000 REINF-HOODLEDGE,UPPER,LH (from '70-Sep)
  superceded 64119-H1000 REINF-HOODLEDGE,UPPER,LH

Upload click to view Album 6971 Album 6973 Post 378850 Post 378850

Caution: rust is common in this area
Post 378850

Retrieved from "http://datsun1200.com/modules/mediawiki/index.php?title=Front_Fender_and_Front_End"

This page has been accessed 14,701 times. This page was last modified 10:12, 9 November 2021. Content is available under Datsun 1200 Club.

Front Fender and Front End

Fenders

Hood Ledge

Hood Ledge Reinforcement