Head gasket

Revision as of 23:03, 15 August 2014; view current revision
<-Older revision | Newer revision->

The Datsun 1200 cylinder head gasket fit A12 and A10 engines. Aftermarket gaskets vary in material and size of cooling holes.

Also See:

• Changing Head Gasket
• Tune-up

Nissan recommends re-torquing the head gasket bolts ever twenty-four months (every two years):

1972 USA Owners manual Retighten cylinder head bolts, manifold nuts & carburetor securing nuts.

Part Numbers

11044-18004 GASKET-CYLINDER HEAD A12 superceeded 

11044-H1000 GASKET-CYLINDER HEAD A12 
11044-H1000 GASKET-cylinder head B110, B210 to '75-4
11044-H1025 B210 from '75-5
11044-H1026
11044-H1027
11044-H3900 GASKET-CYLINDER HEAD A12 0671- 

fits:
A10 PULSAR 1000  BN10  988cc  1978-ON  
A10 SUNNY 1000 B10,B20 1000 1966-1970
A12 SUNNY 1200 B110,B210,C20　　1171cc 1970-73.3  
A12 SUNNY 1200 B210 1973.4-75  
A10 CHERRY 1000 E10, F10 988 1970.10-73.9  
A12 CHERRY 1200 PE10, F10 1171cc 1972-78  

11044-H2300 A12GX, A12T
11044-H2301 [thinner?] A12GX, A12T
11044-H2325 A12GX from '72-6

Head Set

11044-H3926 KIT-GASKET,CYLINDER HEAD
11042-H3927 KIT-GASKET,CYLINDER HEAD

Head Set gasket includes all you need to change the head:

Cylinder head gasket
Valve stem seals
Rocker cover gasket
Gasket-manifold to cylinder head

it may include the following:

thermostat gasket
intake-to-exhaust manifold gasket (heat riser gasket) 
oil cap packing (gasket)
fuel pump gaskets

• Victor HS3602
• FEL-Pro HS21181PT
• ROL HS32060

Nissan Competition

Nismo head gaskets for Nissan A series motor A12,A13,A14,A15 Engine

11044-M0822 t=0.8 79.0 mm bore diameter 
11044-M0823 t=0.6 80.0 mm bore 

シリンダーヘッドガスケット

既に生産廃止