User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Introduction of Datsun Sunny 1400 GX-E

Revision as of 21:17, 27 February 2015; view current revision
<-Older revision | Newer revision->

Datsun 1200 encyclopedia | Recent changes | Edit this page | Page history | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision
Categories: Datsun B310 | Fuel Injection

In 1977 Nissan released the B310 and three months introduced new trims GX-E and SGX-E. These featured fuel injected (EGI) engines, the legendary A14E motor. It improved upon the B310 GX which came with a single carburetor A14S motor. Nissan "introduction" Service Bulletin Number 350 highlights the features of the new model, in this case the biggest change from the GX to the GX-E is the Fuel Injection system. The Service Bulletin No. 350 is 60 pages.


Contents

Overview

NISSAN サービス周報
NISSAN Service Bulletin
昭 和 53 年 2月  第 350 号 (S-27)
February 1978  No. 350 (S-27)
25716.jpg
ダットサンサンー1400 GX-E皮び SGX-E車の紹介
Introduction of Datsun Sunny 1400 GX-E SGX-E Models
排出ガス 53 年度規制適合車 NAPS
Exhaust Gas 1978 Fiscal Year Automobile Compliance [Nissan Anti-Pollution System]
日産自動車株式会社
Nissan Motor Co., Ltd.

[page 1 original, page 28 PDF]

はじめに
Introduction


[page 2 original, page 2 PDF]

目次
Table of Contents

[page 3 original, page 39 PDF]
full
full
サニー 1400 4 ドア セダン GX-E
Sunny 1400 4-door Sedan GX-E

full
full
サニー 1400 クーペ SGX-E
Sunny 1400 Coupe SGX-E

[page 4 original, page 50 PDF]
full
サニー 1400 クーペ SGX-E インストルメント
Sunny 1400 Coupe SGX-E Instruments

full
A14型 EGIエンジン仕様
A14-type EGI-specification Engine

Summary

[page 5 original, page 4 PDF]

概要 Summary

92PS/6,400rpm A14 engine with electronic controlled fuel injection (EGI)

プロペラ シャフトの2分割3ジョエント方式
2 division, 3 u-joint formula Propeller Shaft

Accent Stripe & Rear Emblem

車台実施始番号
CHASSIS NUMBERS
E-HB310型車 Vehicle Types
HB310-000001〜250000(日産車体)セダン        (Nissan car body) sedan
HB310-250001〜500000(冨士重工)クーペ        (Fuji Heavy Industries) coupe
HB310-500001〜999999(座間工場)セダン、クーペ (Zama plant) sedan, coupe

[page 6 original page 5 PDF]

車種構 成 Model Configuration
4-door GX-E  4-speed, 5-speed
       SGX-E 4-speed, 5-speed
Coupe  GX-E  4-speed, 5-speed
       SGX-E 4-speed, 5-speed


Model Type

[page 7 original page 6 PDF]

車種型式 Model Type

--Model--     -頬別--
E - HB310     KRHEAZ
    H: 1400cc      Z: for Okinawa
                   -: Other 
    -: 1200cc     A: automatic transmission
                  F: 5-speed transmission
                  -: 4-speed transmission
                 E: EGI-spec engine
                 -: Carburetor-spec engine
                S: CT [city]
                D: Deluxe
                H: GL, SGL
                X: GX, SGX
               R: 2-door
               -: 4-door
              K: coupe
              -: sedan
E: 1978 emissions regulations
Coupe KHB310
base is Deluxe
LA= SGL,SGX
Z= Cold weather model
O= For Okinawa

Model Table

[Page 9 original Page 8 PDF]

車種型式ー覧表 Model Type - Table List

Main Specifications Table

主要諸元表 Main Specifications Table

Specification Table

明細諸元表 Specification Table

Appearance

外観四面図 Appearance All-sides Diagrams

Driving Performance Curve

走行性能曲線 Driving Performance Curve

Engine Performance Curve

エンジン 性能 曲線 Engine Performance Curve

Engine Performance Curve

[Page 21 original Page 21 PDF]

エンジン 性能 曲線 Engine Performance Curve

Horsepower
A14 : 80 PS @ 6000 RPM
A14E: 92 PS @ 6400 RPM

NOTE: Pferdestärke (PS), abbreviation of the German term for metric horsepower, almost exactly the same as SAE Horsepower.

Torque:
A14 : 11.5 kg/m @ 3600 RPM
A14E: 11.7 kg/m @ 3600 RPM

A14型 EGIエンジン仕様 A14-type EGI-specification Engine
full

A14型 キャブレーターエンジン仕様 A14-type Carburetor-specification Engine
full

Engine

Summary

[page 22 original, page 22 PDF]

1. Summary

Summary

1.1 Summary

E-HB310 type vehicle, certified for 1978 emissions, A14 with EGI engine

E-HB310  A14  meets 1978 emissions standards
E-HB310  A14E meets 1978 emissions standards
E-B310   A12A meets 1978 emissions standards
H-VHB310 A12  meets 1975 emissions standards

Engine Number Embossing

[page 23 original, page 23 PDF]

番号打刻

A14-121716P~

Engine something

[page 24 original, page 24 PDF]

1.3

NAPS

[page 25 original, page 25 PDF]

1.4 NAPS specification

Engine Room

[page 26 original, page 26 PDF]

1.5

full

Engine Appearance

[page 27 original, page 27 PDF]

1.6 Engine 外観 Appearance

full | original

Left side of engine
full | original

Right side of engine
full | original

EGI Control System

[page 28 original, page 29 PDF]

1.7 A-series EGI-specification engine Control System

Engine something

[page 29 original, page 30 PDF]

1.8 Engine

Basic Engine

[page 31 original, page 32 PDF]

2. エンジン本体 Basic Engine

full

Intake Manifold Stud Length
1  45mm length
2  40mm length
   28mm length (additional studs)
水穴 water holes

Piston

[page 31 original, page 32 PDF]

2.2 Piston

No. 1-4 "E"

Camshaft

[page 31 original, page 32 PDF]

Cam taken from B-HB211 (A14 Twin Carburetor)

Timing
A14E: 20, 56, 58, 18
A14:  14, 54, 56, 20

Valve Spring and Valve Seat

[page 32 original, page 33 PDF]

Same as B-HB211 (A14 Twin Carburetor)

Rocker Cover Assembly

[page 32 original, page 33 PDF]

2.5

A14E: Gold Top 
A14S: Blue Top 

full | original
キャブレーターエンジン仕様 Carburetor specification
EGI仕様 EGI specification

Blowby Hose ASSY

[page 32 original, page 33 PDF]

2.6 PCV Positive Crankcase Ventilation System

full | original

Manifold

[page 32 original, page 33 PDF]

2.2 Manifold

Intake Manifold

[page 33 original, page 34 PDF]

2.2.1

full | original

負圧取り出し Negative pressure taken out
VVT バルブへ To the VVT Valve

Exhaust Manifold

[page 33 original, page 34 PDF]

2.2.2

Manifold Cover

[page 33 original, page 34 PDF]

2.2.3

Intake Manifold Gasket

[page 33 original, page 34 PDF]

2.2.4

original
取り付け面 clamp face

See 14035-H9202

Intake Manifold Bracket

[page 33 original, page 34 PDF]

2.2.5

Electronic Fuel Injection

[page 34 original, page 35 PDF]

3. 電子制御料噴射装置 Electronic Control Fuel Injection (Nissan EGI)

B-PA10 (L16 engine) [Stanza]
B-S11 (L18 engine) [S10 Silvia]

Fuel System

[page 34 original, page 35 PDF]

3-1 燃料系

Fuel Pump, Fuel Damper

[page 34 original, page 35 PDF]

3.1.1 Fuel Pump, Fuel Damper

Fuel Filter

[page 34 original, page 35 PDF]

3.1.2 Fuel Filter

Fuel Tube

[page 34 original, page 35 PDF]

3.1.3 Fuel Tube

Fuel Injector

[page 34 original, page 35 PDF]

3.1.4 Fuel Injector

Pressure Regulator

[page 34 original, page 35 PDF]

3.1.5 Pressure Regulator

Air System

[page 35 original, page 36 PDF]

3.2 空気系

Air Duct

[page 35 original, page 36 PDF]

3.2.1 Air Duct

Air Cleaner Element

[page 35 original, page 36 PDF]

3.2.2 Air Cleaner Element

Air Flow Meter

[page 35 original, page 36 PDF]

3.2.3 Air flow meter

B-HB310 A31-000400 22680-H9200
B-PA10  A31-000310 22680-W5501
B-S11   A31-000121 22680-N6904

Air Duct Hose

[page 35 original, page 36 PDF]

エア ダクト ホース
3.2.4 Air duct hose

air flow meter 60mm
throttle chamber 77mm

Throttle Chamber

[page 36 original, page 37 PDF]

3.2.5 Throttle Chamber

full | original

Air Regulator port
Blowby Gas (PCV) port
Idle port
EGR port
VVT port
Distributor Vacuum port

Air Regulator

[page 36 original, page 37 PDF]

3.2.6 Air Regulator

???

車種 car model
流量 flow rate
識別 identification
項目 item
B-PA10
B-HB310B-S11
20°C flow rate14m³/h19m³/h
identificationA32-000400-

Electronic Control System

[page 37 original, page 38 PDF]

3.3 電子制御系

Control Unit

[page 37 original, page 38 PDF]

3.3.1 Control Unit

Fuel Increase Correction

[page 39 original, page 41 PDF]

3.3.2 燃料増量補正

Air-fuel ratio switching instrumentation

[page 40 original, page 42 PDF]

3.4 空燃比切替装

full | Japanese

EFI Relays

[page 41 original, page 43 PDF]

3.5 電子制御燃料噴射装?のリレー類

3.5.1 EGI Relay

3.5.2 Fuel Pump Relay

EGR

[page 42 original, page 44 PDF]

4. 排気 ガス還流(EGR)装置
4. Exhaust Gas Recirculation (EGR) Equipment

EGR Equipment

[page 42 original, page 44 PDF]

4-1 排気ガス還流装置の装置;
4-1 EGR Equipment

EGR装置は、キャブレター仕様と同じ負荷比例代です。制御信号として排圧のほかに吸入空気量(負荷)に比するベンチュリー負圧を加する

COMPONENT PARTS
  PART NAME                FUNCTION
1 neutral switch           neutral position detection
2 speed sensor, speed amp  detection vehicle speed from about 45 km/h
3 TV valve                 water temp (about 50C) ???
4 VC solenoid valve        ?
5 VVT valve                ?
6 EGR control valve        ?

full | Japanese

[page 43 original, page 45 PDF]

WATER TEMP         TRANSMISSION   VEHICLE         VC solenoid  VENTURI 
(TV VALVE)         GEAR POSITION  SPEED           valve
about 50C or less  -              -               -
about 50C or more  neutral        -               ON 
                   except neutral ~45km/h or less OFF
                                  ~45km/h or more ON

EGR 2

[page 43 original, page 45 PDF]

4-2 排気ガス還流装置の概要
4-2 Overview of the Exhaust Gas Recirculation system

EGR Control Valve

[page 43 original, page 45 PDF]

4.2.1 EGR Control Valve

full | original

VVT Tube

[page 43 original, page 45 PDF]

4.2.2 VVT Tube

full | original

VVT Valve Bracket

[page 44 original, page 46 PDF]

4.2.3 VVT Valve Bracket

full | original

取り付け mounting

EGR Passage

[page 44 original, page 46 PDF]

4.2.4 EGR Passage

full | original

排気ガス涌 路

Straight Connector

[page 44 original, page 46 PDF]

4.2.5 Straight Connector

互換性:なし(A12A型、キャブレター仕様と有)
Compatibility: None (A12A type, carburetor specifications and ?)

EGR Tube

[Page 44 original, page 46 PDF]

4.2.6

full | original

水温 water temperature

TV = Thermal Valve

Vacuum Piping Figure

[Page 45 original, page 47 PDF]

4-3 バキューム配管実態図
4-3 Vacuum Piping Figure

full | original

長さ length
識別色 identification color
緑 green
白 white
青 blue
黄 yellow
桃 peach
部位 part
No 長さ    識別色   部位
 1 170mm (green)  vacuum gallery - pressure regulator
 2  90mm (peach)  VVT tube - VVT valve
 3 200mm (white)  VVT valve - TV valve side 3-way connector
 4  70mm (yellow) vacuum gallery - distributor side 3-way connector
 5  50mm (yellow) vacuum gallery - distributor side 3-way connector
 6 190mm (white)  vacuum gallery - TV valve
 7 170mm (white)  EGR control valve - TV valve side 3-way connector
 8 110mm (white)  TV valve - 3-way connector
 9 540mm (yellow) distributor - 3-way connector
10 120mm (blue)   vacuum gallery - VC solenoid valve [Vacuum Cut]
11 200mm (blue)   VVT valve - VC solenoid valve
12 200mm (blue)   throttle chamber - vacuum gallery
13  90mm (green)  vacuum connector - vacuum gallery
14 130mm (yellow) throttle chamber - vacuum gallery (distributor use)
15 230mm (blue)   throttle chamber - VC solenoid valve
16 170mm (white)  throttle chamber - vacuum gallery (EGR control valve use)
17 blanking cap

Air Cleaner and EAI

[page 46 original, page 48 PDF]

5. エア クリナー及び二次空気導入(EAI)装置 Air Cleaner and Exhaust Air Induction (EAI) Equipment

left caption: 接続ホース Connecting Hose
right caption: EAI バルブ Valve
full | Japanese
lower caption: 二次空気導入チューブ Secondary air induction tube

EAI Hose

[page 46 original, page 48 PDF]

5.1

EAI Valve

[page 47 original, page 49 PDF]

5.2

EAI Tube

[page 47 original, page 49 PDF]

5.3

Engine Electrical

[page 48 original, page 51 PDF]

6. Engine 電装 Electrical

Distributor

6.1 Distributor [points type]

Hitachi D4A7-01
Mitsubishi T4T00475

Centrifugal Advance 12 degrees maximum @ 2400 rpm:
full

Vacuum Advance 13.5 degrees maximum:
full

Alternator

6.2 Alternator

IC internally regulated
Hitachi LR150-36
Mitsubishi AQ2250C31

PA10 EGI [Datsun Stanza]

full | Japanese

Fuel System

[page 49 original, page 52 PDF] K 7. 燃料系統 Fuel System

燃料系 Fuel System

基本的には、キャブレーター仕様とはぼ同じですが、燃ホースの径がー部異なります。Basically, it is the same to pot and carburetor specifications - diameter of the fuel hose differs.

仕様 Specification

...
フューエル ゲージ  ユニット Fuel Gauge Unit
サーミスター式(GL以上) 
Carburetor: Thermistor type (GL or more)  EGI: Thermistor type
...
フューエル チューブ Fuel Tube
  アウトレット       Outlet  6.35mm carburetor  12mm EGI
  リターン          Return  6.35mm carburetor   8mm EGI

Regular vs GL/EGI sender

Exhaust System

[page 49 original, page 52 PDF]

8. 排気系統 Exhaust System

排気系 Fuel System

排気系は、触媒コンバータ(サイズ、容量)、... Exhaust system, catalytic converter (size, capacity), ...

Chassis

[page 50 original, page 53 PDF]

Summary

1. 概要 [Summary]

Propeller Shaft

[Page 50 original, page 53 PDF]

2. propeller shaft

3-piece

            GX-E/SGX-E  Other B310 MT  B310 AT
Type        3-joint     2-joint        <--
length      440+735 mm  1177 mm        1045 mm
O.D.        63.5 mm     68.9 mm        <--
thickness   1.6 mm      <--            <--
spline I.D. 20x18       <--            25x24
journal     shell type  <--            <--
fix method  crimped     <--            <--

Body

[page 51 original, page 54 PDF]

Summary

1. Summary

accent stripe, emblem for trunk lid (sedan) or back door (coupe), rear floor insulator

Body Exterior

1. Summary

2. 外装 Body - Exterior

Accent Stripe

2.1 アクセントストライプ accent stripe

NISSAN EGI の文字をネ織り込んだ アクセント ストライプを、標準装着しました。
The accent stripe interwoven with character of NISSAN EGI, fitted as standard.

EGI_stripe.jpg

Rear Emblem

2.2 '1400 GX E' or '1400 SGX E' emblem
EGI_badges.jpg
sfull

Body Interior

Rear Floor Insulator

3. 内装 Interior

Floor Insulator

Body Electrical

[page 52 original, page 55 PDF]

ボディ電装
Body electrical

Summary

1. 概要

ハーネス関係、タコメータ、リレー、ウォッシャータンク、エアコンの高圧ホース及びバキューム ホースの取り付け状態以外は、GX、SGXのキャブレター仕様車と同じです。

1. Summary

Harness relationship, tachometer, relay, washer tank, except mounting state of high pressure hose and vacuum hose of air conditioning, GX, this is the same as carburetor specification car of SGX.

Wiring and Relays

[page 53 original, page 56 PDF]

配線及びリレー
Wiring and relays

Wiring

[Page 52 original, page 55 PDF]

2-1 配線
2-1 Wiring

Main Harness
Connects to relays of EGI and EGI harness connector

Body harness
Connects to fuel pump

Battery cable
Battery cable of EGI specification vehicle connects to fusible links [接続するコネクタを設けました。]

Fusible Link
Fusible link of EGI specification vehicle is 0.5(green), 2 used [2本設けました。]

Relay

[Page 53 original, page 56 PDF]

full | japanese
Relay Bracket

full | japanese
Right Hood Ledge
フード レッジ 右

ホールド リレー
hold relay

full | japanese
radiator core support
ラジエータ コア サポート

排気温度警告灯 チェック リレー
Exhaust Temperature warning light Check Relay

Tachometer

[page 54 original, page 57 PDF]

3. [Tachometer Yellow Zone 6400-6800, compared to 6000-6250 for A14S]

              EGI仕様車  (参考)キャブレター仕様車
イエロー ゾーン 6400~6800  6000~6250
レッド ゾーン   6800~8000  6250~8000
             EGI        Carbureted
Yellow Zone  6400-6800  6000-6250
Red Zone     6800-8000  6250-8000

full

Washer Tank

[page 54 original, page 57 PDF]

4. Washer Tank 2.2 litre, tank, fusible link & relay bracket, rear wiper & rear washer

full | japanese

Air Conditioner (Cooler Option)

[Page 55 original, page 58 PDF]

5. ???

Air conditioner (dealer option), hoses

High Pressure Hose

[Page 55 original, page 58 PDF]

高圧

???

full | japanese

Vacuum Hose

[Page 55 original, page 58 PDF]

エアコン用FICDアクチュエーカーがスロットル チャンバー下部にあるため、バキューム ホームの配管は、右図のようにしました。
FICD actuator for aircon is at the bottom of the throttle chamber, plumbing vacuum home as shown in the diagram on the right.

full | japanese

Final Page

[Page 55+1 original, page 60 PDF]

複製を禁ず
印刷発行
印刷発行 昭和53年2月
実費210円
発行所 日産自動車株式会社
担当 サービス 部
東京都中央区銀座6ー17ー1
T-802090
Replication prohibited
Print issued in February 1978
Actual cost 210 yen
Publishing office Nissan Motor Co., Ltd.
Service Representative Part
Ginza, Chuo-ku, Tokyo 6-17-1
T-802090