A few of us took a day trip to Suzuka Circuit to check out the track. There was a major Bicycle Event on the Main track and a small Motorcycle event on the small track in back. I found this fine example at the motorcycle race.
i had the nuts i bought from a member machined and an extra bit made (see TOP and BOTTOM in pic.. these went into the top and bottom of the adjustable strut top. very snug fit.), so the struts went in at long last. yes i can actually break properly now. all stanza bits incl control arms, struts, strut inserts, discs, calipers and 120Y control arms. had discs machined and used lowered stanza springs, which has left my front end one or two inches too high. They are king springs so now I will need to get them lowered. Toe was way way out and too much pos camber was easily adjusted out with an alan key. Strut work done by www.tweakit.com.au. Thanks greg doug and angus for yer help. took me years to get off my duff and do this. woohoo.
Ads
2006/9/3 14:32 
Tell a friend
3520 
0 
0.00 (0 votes)
