Here are the tricky hand made springs developed and made by John Taylor at Pedders Penrith. Also included are the koni adjustables and nolathane bushes. Note that the factory rubber bushes are retained at the top of the front spring mounting point...with the rest nolathane. The whole setup is around $700 AUS and needs no sway or panhard to complement it.
New Falkens 185/60 -13's on Western Wheel 13 X 5.5 fake minilites. These things are 7 1/4 inches wide with 4 5/16 BS. The fronts touch the front lower part of the fender. The rears touch the lip of the wheel opening. I'll roll the lips with a bat and it should be fine. The car is also lowered about 1.5 inches.