User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Main : Mechanical : Drive Train H165 LSD, 2-way, setting backlash

[<   Previous  423  424  425  426  427  428  429  Next   >]

H165 LSD, 2-way, setting backlash
H165 LSD, 2-way, setting backlashPopular
SubmitterddgonzalMore Photos from ddgonzal   Last Update2010/1/18 3:21    Tell a friendTell a friend
Hits2151  Comments6    0.00 (0 votes)0.00 (0 votes)
This is how you set backlash after changing gears

[<   Previous  423  424  425  426  427  428  429  Next   >]

The comments are owned by the poster. We aren't responsible for their content.

Poster Thread
A14force
Posted: 2010/1/19 5:30  Updated: 2010/1/19 5:30
No life (a.k.a. DattoMaster)
Joined: 2003/12/3
From: Christchurch NZ
Posts: 3706
 Re: H165 LSD, 2-way, setting backlash
What kind of slipper do you have here DD?
Bearing blue is a good way to check the mesh too. If the mesh is good, then the lash should be okay too.
The H series diffs are a bit tricky since the shims sit behind the bearing cones. It's easy to ruin the bearings when removing them if you don't have the right tools.

Poster Thread
2QK4U
Posted: 2010/1/19 5:39  Updated: 2010/1/19 5:39
Home away from home
Joined: 2005/4/19
From: Gold Coast, Australia
Posts: 744
 Re: H165 LSD, 2-way, setting backlash
i machined a set of bearings .001' oversize too set the backlash and pinion depth. technially yes i should use the bearing i intend too run in the diff but i figured its more reliable than running a potentially damaged bearing from pulling them on and off several times.

Poster Thread
2QK4U
Posted: 2010/1/19 5:41  Updated: 2010/1/19 5:41
Home away from home
Joined: 2005/4/19
From: Gold Coast, Australia
Posts: 744
 Re: H165 LSD, 2-way, setting backlash
also looks like the bearing journals have been machined down too fit the original H165 bearings.

this is what pitroad were doing? there abit thin. one of the rally guys had a picture where this modification had failed and turned the journal off the lsd housing.

Poster Thread
A14force
Posted: 2010/1/20 4:53  Updated: 2010/1/20 4:53
No life (a.k.a. DattoMaster)
Joined: 2003/12/3
From: Christchurch NZ
Posts: 3706
 Re: H165 LSD, 2-way, setting backlash
Wow I see what you mean! A guy here in NZ welded the dasun axle tubes to a trd centered toyota center housing. He was selling it for sh1tloads, but it gets around this issue.

Poster Thread
ddgonzal
Posted: 2010/1/20 5:08  Updated: 2010/1/20 5:08
Moderator
Joined: 2001/5/3
From: 48 North
Posts: 31599
 Re: H165 LSD, 2-way, setting backlash
I'm not following? Slipper? Bearing journals?

H190 had three types of bearing/side gears, maybe H165 likewise had variations.