"Custom" means knocked together in the back yard on a sunday arvo..... when I say the back yard, thats what I mean- no shed or workbench at my joint. I hacked off the tube with an angle grinder, bashed it flat with a rubber mallet and opened it back out with screwdrivers, 1/4 and 3/8 extension bars, then roughed it out with an orbital and finished up with wet and dry. not difficult at all.
The difficult bit is setting them up. Because the ute cabin is so short, it gives you really bad angles to work with. The mirrors have to be mounted as far down the doors as possible to work at all, or on the front guards, but then they are too small to see anything out of. The drivers side one is ok, you have to look at it through the 1/4 window though. However I couldnt get enough angle on the passenger side mirror, so its pretty much just cosmetic...... It gives you a clear view of the blind spot, but you have to move your head to the middle of the cabin to see down the side of the car.
Spewin.
I'll try and get some pics of them on the car.