[< Previous 3581 3582 3583 3584 3585 3586 3587 Next >]
what is this?
 datsunny  2006/12/29 3:31  Tell a friend
 1958  10  0.00 (0 votes)
anyone know where this was supposed to go? its the bit on the left
|
|
|
[< Previous 3581 3582 3583 3584 3585 3586 3587 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| datsunny |
Posted: 2008/6/14 1:51 Updated: 2008/6/14 1:51 |
Just popping in  Joined: 2004/6/15 From: New Zealand Posts: 10 |
 Re: what is this? Well, i posted that question a long time ago now, and I have only just read the answers. Problem is that I have been running the motor without that part installed. Oops. I will let u know if i encounter any problems. I guess its there for a reason tho....
I am not pulling the motor apart again until i blow it up!
|
|
|
|
| Poster |
Thread |
| mperdue |
Posted: 2008/6/14 3:18 Updated: 2008/6/14 3:18 |
Home away from home   Joined: 2004/6/28 From: Dallas TX Posts: 346 |
Re: what is this? That's the spirit datsunny. If it ain't broke don't fix it!
|
|
|
|
| Poster |
Thread |
| A14force |
Posted: 2006/12/29 22:47 Updated: 2006/12/29 22:47 |
No life (a.k.a. DattoMaster)   Joined: 2003/12/3 From: Christchurch NZ Posts: 3707 |
Re: what is this? I've left these out before too. It's a pain in the ass to have to pull it to bits again. Lukily, the sealer hadn't set so I could reuse the gaskets.
|
|
|
|
| Poster |
Thread |
| pepper |
Posted: 2006/12/29 22:52 Updated: 2006/12/29 22:52 |
No life (a.k.a. DattoMaster)  Joined: 2004/5/30 From: Tamworth , NSW Posts: 2484 |
Re: what is this? my brother put this bit on the wrong way round on my r32, after some head scratching as to what the funny noise was when we started the car, we removed the timing covers to see the lip was facing backward and had sheared 5mm off the side of my brand spankers timing belt. grrr
|
|
|
|
| Poster |
Thread |
| kululadotgroen |
Posted: 2006/12/29 18:41 Updated: 2006/12/29 18:41 |
No life (a.k.a. DattoMaster)  Joined: 2006/7/12 From: Cape Town ZA Posts: 1054 |
Re: what is this? The very frist engine I completely assembled myself was a A12, I assembled subs and heads but not complete before this, my dad made me do this, think I was 12... After fitting the sump, and wanting turn the engine over, my dad picked this part out from others, and put it in front of me an said I forgot to fit this, and I must figure out where it goes.
After some head scratching and deliberation, he said that it's the oil slinger, and tat I had to strip the sump ad timing cover and stuff of again to get it in.
I didn't forget to fit it when I assembled my first A14...
|
|
|
| Poster |
Thread |
| Dodgeman |
Posted: 2006/12/29 10:25 Updated: 2006/12/29 10:25 |
No life (a.k.a. DattoMaster)  Joined: 2003/6/27 From: Southern Tablelands N.S.W. Australia Posts: 8287 |
Re: what is this? Now you know why a $10 second hand workshop manual is a cheap investment.
|
|
|
| Poster |
Thread |
| kegs |
Posted: 2006/12/29 4:21 Updated: 2006/12/29 4:21 |
No life (a.k.a. DattoMaster)  Joined: 2003/1/5 From: campbelltown (sydney) australia Posts: 1802 |
Re: what is this? looks like the plate that goes behind the crank pulley? or the timing gear notsure but definately goes on the crankshaft
|
|
|
|
| Poster |
Thread |
| ddgonzal |
Posted: 2006/12/29 6:02 Updated: 2006/12/29 6:02 |
Moderator   Joined: 2001/5/3 From: 48 North Posts: 31640 |
Re: what is this? looks like the oil thrower (oil slinger) that goes on the crankshaft, inside the timing cover.
|
|
|
|
|
| Poster |
Thread |
| pitanando |
Posted: 2006/12/29 8:34 Updated: 2006/12/29 8:34 |
Home away from home  Joined: 2004/9/17 From: portugal Posts: 271 |
Re: what is this? Yep!thet it from the interior of the timing cover. it goes on top ( front )of the crankshaft pulley. good luck!  |
|
|
|
|
| Poster |
Thread |
| ddgonzal |
Posted: 2006/12/29 8:45 Updated: 2006/12/29 8:45 |
Moderator Joined: 2001/5/3 From: 48 North Posts: 31640 |
Re: what is this? Be sure not to put it on backwards.
|
|
|
|
|
| Poster |
Thread |
| Mustard |
Posted: 2007/4/2 20:46 Updated: 2007/4/2 20:46 |
Not too shy to talk  Joined: 2007/2/19 From: Posts: 33 |
Re: what is this? Hallo guys -I'm looking at this topic from the archives. Which way is the correct way to fit the oil slinger to the nose of the crank?
Does the dished part face towards the timing cover or towards the timing chain?
Is it important to get the orientation right?
What does it do?
Pardon the silly questions!
Cheers and thanks for any replies
|
|
|
|
Misc