[< Previous 231 232 233 234 235 236 237 Next >]
VanDiscSkylineCaliper
 BigV  2007/10/31 23:57  Tell a friend
 2814  5  0.00 (0 votes)
| Stanza strut with stanza hub with the large vannett vented rotor (bolt on) had strut mounting lugs machined flat on back and the holes offset drilled closer to stub axel taking out the thread as skyline callipers are threaded. Then had approx 8mm machined of the callipers mounting lugs to get the offset correct this would depend on how much need to be taken of the mounting lugs on the strut to get them flat. With a little relieving of the cooling fins on the calliper they fit inside 13inch hotwires. |
|
|
[< Previous 231 232 233 234 235 236 237 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| racer135 |
Posted: 2014/8/6 13:16 Updated: 2014/8/6 13:16 |
Home away from home   Joined: 2010/2/12 From: Near Bundaberg QLD Posts: 384 |
 Re: VanDiscSkylineCaliper What model Vanette did the vented rotors come from?
|
|
|
|
| Poster |
Thread |
| ddgonzal |
Posted: 2014/8/21 11:22 Updated: 2014/8/21 11:22 |
Moderator   Joined: 2001/5/3 From: 48 North Posts: 31575 |
Re: VanDiscSkylineCaliper some C120 Vanette came with vented rotors: * 238 mm rotors on June 1981 up GL * 250 mm rotors on June 1981 up GS see 910_Brakes#Specifications |
|
|
|
| Poster |
Thread |
| Tyrie |
Posted: 2007/11/1 2:33 Updated: 2007/11/1 2:33 |
No life (a.k.a. DattoMaster)   Joined: 2004/5/4 From: Canberra Posts: 4200 |
Re: VanDiscSkylineCaliper how thick are the caliper mounting lugs after machining 8mm off?
|
|
|
|
| Poster |
Thread |
| BigV |
Posted: 2007/11/1 13:20 Updated: 2007/11/1 13:20 |
Home away from home  Joined: 2005/4/8 From: Central Vic Posts: 322 |
Re: VanDiscSkylineCaliper they are still thicker then the rest of the calliper bracket
they basically have a section in the lug with no thread for 10mm then the threaded section so I havnt removed any of the threaded section of the calliper
|
|
|
|
|
| Poster |
Thread |
| andrew1200 |
Posted: 2014/9/8 10:33 Updated: 2014/9/8 10:33 |
Quite a regular   Joined: 2011/6/24 From: brisbane Posts: 46 |
Re: VanDiscSkylineCaliper hi Guys have done this exact think on my 1200 ute but run datsun blue bird trx disc on the back also with 120y booster and 7/8 master cylinder does'nt lock rears fantastic brack set up But i ran stanza front legs and lower control arms { girlock calipers } and changed the rotors with c20 vanette rotors and calipers regards Andrew
|
|
|
|
Misc
Tech Section