[< Previous 253 254 255 256 257 258 259 Next >]
[< Previous 253 254 255 256 257 258 259 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| TUF-110 |
Posted: 2009/6/8 11:24 Updated: 2009/6/8 11:24 |
No life (a.k.a. DattoMaster)   Joined: 2007/5/23 From: Wagga Wagga, NSW Posts: 1250 |
 Re: Right angle distributer more info! this setup looks very interesting, does it come off something?
cheers jake
|
|
|
|
| Poster |
Thread |
| Wombat_racing |
Posted: 2009/6/9 0:03 Updated: 2009/6/9 0:03 |
Home away from home   Joined: 2004/11/27 From: Tasmania Posts: 773 |
Re: Right angle distributer Yeah more info would be good tell us where you got it or what it comes from.
|
|
|
|
|
| Poster |
Thread |
| ddgonzal |
Posted: 2009/6/9 3:42 Updated: 2009/6/9 3:42 |
Moderator   Joined: 2001/5/3 From: 48 North Posts: 31575 |
Re: Right angle distributer Hmmm. that's unusual, probably a custom machining job. Has a gear/spindle on the end like a Suzuki?
|
|
|
|
|
| Poster |
Thread |
| datto1000wagon |
Posted: 2009/6/9 8:30 Updated: 2009/6/9 8:32 |
No life (a.k.a. DattoMaster)  Joined: 2006/5/2 From: Darwin NT Posts: 2079 |
Re: Right angle distributer by the looks of it, it is cast (the body that houses the spindles and transfigures it to right angle) so i assume it is off another vehicle and me thinks the spindle shaft has been either removed and machined or a whole new one has been made
edit is it just me or does that have an adaptor plate made up for the base?
|
|
|
|
|
| Poster |
Thread |
| Wombat_racing |
Posted: 2009/6/9 23:36 Updated: 2009/6/9 23:36 |
Home away from home Joined: 2004/11/27 From: Tasmania Posts: 773 |
Re: Right angle distributer I thought it looked like a plate has been added to it! Still like to know what its off?
|
|
|
|
|
| Poster |
Thread |
| Gav |
Posted: 2009/6/10 1:53 Updated: 2009/6/10 1:53 |
Home away from home  Joined: 2008/12/8 From: Sydney Posts: 471 |
Re: Right angle distributer Sorry boys, there is a little info on my build page. I will do my best to explain it.
Its my standard suzuki gti dizzy. If you look from the top view, it bolts into adaptor as it would normaly go into the head and you adjust timming as usual from here. The right angle adaptor (the cast section) I think is off something like a sierra. Inside this there was alot machining and also machined shafts and gears. The right angle bolts to the plate that you can see where the shaft comes out with the two bearings. This plate was made and bolts to the head where the dizzy is originally ment to go. The end caps in the head bolt on holding the bearings.
Just to make things more complicated, the dizzy now spins backwards. It was modified to do this.
|
|
|
|
Mechanical
2009/6/8 9:35 
Tell a friend
2752 
8 
0.00 (0 votes)