User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Main : Mechanical : Brakes Race Brakes 1200 coupe

[<   Previous  70  71  72  73  74  75  76  Next   >]

Race Brakes 1200 coupe
Race Brakes 1200 coupePopular
SubmittersikyneMore Photos from sikyne   Last Update2014/11/2 6:11    Tell a friendTell a friend
Hits2941  Comments5    0.00 (0 votes)0.00 (0 votes)

[<   Previous  70  71  72  73  74  75  76  Next   >]

The comments are owned by the poster. We aren't responsible for their content.

Poster Thread
sikyne
Posted: 2014/11/2 6:17  Updated: 2014/11/2 6:21
No life (a.k.a. DattoMaster)
Joined: 2006/6/4
From: Ballarat Victoria
Posts: 1309
 Re: Race Brakes 1200 coupe
Just thought id post a pic of the front brakes on the coupe. I'm a bit restless while I wait for some clutch plates to turn up from the UK.

Rotors are floating AP, Calipers are PFC. Probably overkill for the Datto but they were cheap. Rotors and hats are SH ex Nascar rears. I just redrilled them to 4 stud and had them ground to clean them up a bit.

Poster Thread
ddgonzal
Posted: 2014/11/4 8:14  Updated: 2014/11/4 8:14
Moderator
Joined: 2001/5/3
From: 48 North
Posts: 31575
 Re: Race Brakes 1200 coupe
Looks very nice

Poster Thread
mcgee
Posted: 2014/11/13 5:53  Updated: 2014/11/13 5:55
Home away from home
Joined: 2005/3/2
From: Canberra
Posts: 481
 Re: Race Brakes 1200 coupe
What hubs are you running?
Assuming they fit un 15" wheels for IP.
Interesting that you can get them to fit on the trailing side of the strut.
I always end up hitting the steering arm whith larger brakes.

Poster Thread
sikyne
Posted: 2014/11/14 0:21  Updated: 2014/11/14 0:21
No life (a.k.a. DattoMaster)
Joined: 2006/6/4
From: Ballarat Victoria
Posts: 1309
 Re: Race Brakes 1200 coupe
G,day Bryan, Yeah, they fit under 15x7's. the rotors are 309mm and I use a 45mm roll center spacer under the strut and above the steering arm. This helps with caliper clearance. With the caliper at the rear, I can also get the 4" brake ducting in the front. Its a 180B stub from memory. Hope that helps. What hub are you using?

Poster Thread
mcgee
Posted: 2014/11/22 13:31  Updated: 2014/11/22 13:31
Home away from home
Joined: 2005/3/2
From: Canberra
Posts: 481
 Re: Race Brakes 1200 coupe
Awesome setup. did you make the nationals? If so how did the new brakes feel? Im running stanza hubs and rx7 calipers with 296mm rotors. If i remember correctly not much difference to the 180b hubs/struts. In due coruse would like to make the hubs out of alloy. Have them drawn on CAD just a bit lazy in getting them made. Focus for me is getting the rear end sorted. Sway bar installed kaaz lsd inbound. Will see if i can get drive with that change. have you tried running without the front roll centre spacers? I have some too but unsure if the benifit the front end grip.