[< Previous 704 705 706 707 708 709 710 Next >]
Seat Belts
 ddgonzal  2016/4/12 23:28  Tell a friend
 2165  4  0.00 (0 votes)
| 2-door sedan floor retrofitted with 1977 Datsun 620 retractor seat belts |
|
|
[< Previous 704 705 706 707 708 709 710 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| datsunbeginner |
Posted: 2016/9/14 2:52 Updated: 2016/9/14 2:52 |
No life (a.k.a. DattoMaster)   Joined: 2010/6/2 From: Toowoomba & New Jersey USA Posts: 2341 |
 Re: Seat Belts Is the tongue on the 3rd point bolted to the same mounting point as the retractor? Or separate hole?
|
|
|
|
| Poster |
Thread |
| ddgonzal |
Posted: 2016/9/14 3:54 Updated: 2016/9/14 3:54 |
Moderator   Joined: 2001/5/3 From: 48 North Posts: 31575 |
Re: Seat Belts Yes sir, I bolted it to the same bolt. In the Datsun 620 there are actually 3 mounting bolt spots (only two in the 1200)
|
|
|
|
|
| Poster |
Thread |
| datsunbeginner |
Posted: 2016/9/14 5:09 Updated: 2016/9/14 5:09 |
No life (a.k.a. DattoMaster) Joined: 2010/6/2 From: Toowoomba & New Jersey USA Posts: 2341 |
Re: Seat Belts The reason I ask is because I am sourcing seat belts for my 1200 ute and 1200 coupe.
I noticed my 1200 ute has 2 mounting point spots only.
My 1971 Coupe however has 3 mounting point spots. 2 are the same as the ute, and the third is just above the back seat pretty far back near the end of the side windows. I think that is an usual spot since the seat belt would be blocking the view out the side window. I see in the tech wiki they changed this mounting point in 1972 models.
|
|
|
|
|
| Poster |
Thread |
| ddgonzal |
Posted: 2016/9/20 6:54 Updated: 2016/9/20 8:16 |
Moderator Joined: 2001/5/3 From: 48 North Posts: 31575 |
Re: Seat Belts Yes, the third bolt hole was an upper bolt hole
The 620 belts -- as I remember -- were designed for two lower bolts, but I could be wrong and perhaps they only used a single lower bolt like the late 1200 retracting belts
|
|
|
|
Mechanical
Body and Interiors