[< Previous 3828 3829 3830 3831 3832 3833 3834 Next >]
New FRP GX Hood
 AFRacer  2004/4/3 10:25  Tell a friend
 3341  2  0.00 (0 votes)
| Here is the GX hood that Matsuoka sells here in Japan for around $500. |
|
|
[< Previous 3828 3829 3830 3831 3832 3833 3834 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| nick_m |
Posted: 2006/1/24 5:55 Updated: 2006/1/24 5:55 |
Home away from home   Joined: 2004/8/30 From: Christchurch Posts: 405 |
 Re: New FRP GX Hood Do these use open and shut like a factory bonnet.
i'e. do they use the factory mounting hardware and latches or do you need bonnet pins
Cheers
Nick
|
|
|
|
| Poster |
Thread |
| sidedraught |
Posted: 2006/3/12 8:12 Updated: 2006/3/12 8:12 |
No life (a.k.a. DattoMaster)   Joined: 2004/9/4 From: sydney Posts: 3098 |
Re: New FRP GX Hood Just a reminder that Colin is selling a genuine GX hood just like this one, asking price $450, right here in Sydney.
PM me if your interested.
|
|
|
|
|
| Poster |
Thread |
| AFRacer |
Posted: 2006/3/12 8:48 Updated: 2006/3/12 8:48 |
Home away from home  Joined: 2002/3/7 From: Little Rock, AR Posts: 639 |
Re: New FRP GX Hood This one does use the factory mounting setup, it has two studs on each side for the hinges, and then some for the hood latch. No hood pins are required, but I'd still run them anyway. In fact, I'd probably rather run nothing but hood pins. The constant pushing down to close the latch will cause the paint to crack very quickly after a few times of that.
|
|
|
|
Mechanical
Body and Interiors