|
|
| Gearbox crossmember HELP I am currently making 1 |
Subject: Gearbox crossmember HELP I am currently making 1
by Demo on 2007/4/29 2:02:38
Hey guys
i have a 4age engine with a t40/t50 box.
I currently have the steel mounts that are straight and are bolted to the gearbox.
I plan to put gearbox in place and bend some other THINNER metal as a template for each side then get bent at the correct angle to end up flat on the floor.
I have to get mopunts bent as there about 5 10 mm thick.
QUESTIONS!!!!!!!!!!!!!!!!!!!!!!!!!!
Am i on the rite track???
Do you need to run rubbers?
and do they go where the mount bolts to box or floor???
Any suggestions on where to get correct rubbers????
And should i make another plate that conects the 2 mounts together fo support???
And if so where is the stongest part to conect the 2???
I was thinking somewhere on the flat part where bolts to floor and make a big bend 2 go around the box and conect at same flat part on both sides.....
If some1 has done this before i would love your help 2 answer some of my questions.
Also WANTED
booster
120y
180b
200b
1200 ute door glass
Pm me with price with postage PLEASE
thanks every1
|
|
