|
|
| Re: RX7 S4 Calipers |
Subject: Re: RX7 S4 Calipers
by flyby on 2007/5/18 15:46:16
Re: the Maddat conversion...
The 200B hub needs to be both machined down in diameter & also depth to maintain correct offset, otherwise the alignment between rotor & caliper is incorrect.
Sure, some people may be able to do this, but the majority will not. If this is not machined correctly, the results could be catastrophic.
The caliper also needs scalloping to clear the edge of the bracket.
Maddat is happy to do kits with people supplying their own calipers, but this is the minimum they will do.
I bought this conversion, and see it as a case of you get what you pay for.
|
|
