Subject: Re: Now you see it now you don't by dazzasute on 2007/6/20 4:39:53
just be VERY careful you don't end up warping the whole panel. If you can get a grinder in behind, try welding up the gap first, then grind the actual filler part off later. (remove the fuel tank/lines etc first obviously ) That way the original part should hold the panel in the right shape. If you just cut a big square out from the outside of the panel, it makes it very easy to warp when you weld it up.
) That way the original part should hold the panel in the right shape. If you just cut a big square out from the outside of the panel, it makes it very easy to warp when you weld it up.