|
|
| Re: Adjustable Camber / Castor Plates |
Subject: Re: Adjustable Camber / Castor Plates
by racetech on 2009/6/22 11:24:09
In the picture you can see the 3rd hole, but it will be destroyed when I have all the parts and do the final cut out. I'm after max castor and will play around with camber, need to use the full surface of the semi slicks.
I'm going to use some nice fat and wide washers at the bottom as there are already a double plate for strength.
The track racers normally only want camber and can move the plates around to utilize only the original holes.
If there are interest, I'll even change the CAD drawings for this purpose.
|
|
