|
|
| 1200 Ute booster |
Subject: 1200 Ute booster
by JDWhite on 2009/6/28 14:11:47
Hi All,
This has probably been answered before but stuffed if I can find it....
I have a '73 1200 ute which I aquired which was painted 14 years ago and put into storage unassembled. I am in the process of putting this together. 120Y discs and struts were fitted with the un-boosted master cylinder, but the thing doesnt stop! You need to haul on the pedal to get anything to happen.
What is the best thing to do as far as a booster goes? It has a 2 bolt fitup on the firewall for the master cylinder, and the speedo cable comes out very close to the top of it, and the clutch cable is not too far away either. I have a Sunny booster which I had a look at fitting, but there is not enough room for the 4 bolt fitup, and the firewall is also not flat around that area either. Does a 120Y booster have a 2 bolt arrangement at the firewall, or am I better off looking for a remote booster?
Surely someone has done this before!
Cheers,
JD
|
|
