|
|
| Re: Rotary |
Subject: Re: Rotary
by cfwase on 2003/9/7 2:19:08
to put a rotary into a 1200, would involve a new crossmember, a new gearbox tunnel, new gearbox cross member and thats pretty mcuh it, other than all the other things realated to rotaries of corse.
my 12A runs 14.6 1/4 mile times thats N/A with standard card, but superchager coming soon that will bump it up to 350hp ish, so should be fun :)
standard port on a 12A makes 130hp at the flywheel with a good carb exhausts etup.
mild ports around 200hp is available.
extend ports 220hp is achieveable.
bridgeports 260hp.
jay ports 300hp but this reduces engine life as the water galleries get in the way of the porting and get blocked up.
peripheral ports has potential for over 300hp but acheives its power above 8000rpm, and wont idle under 2000rpm. but again engine life is dramtically reduced.
|
|
