|
|
| Re: My wheels dont fit, too wide, any id |
Subject: Re: My wheels dont fit, too wide, any id
by mely1200 on 2001/6/17 4:54:00
The spacer plates from autobarn are huge, the smallest is 15 mm I think. I used some old brake drums off a 200B with the edges cut off, they spaced out my fronts enough to get 195 x 14s on.
But my guards are really pumped and I have 3 degrees of camber. You may need to cut and bend the arch inside the guard (if you dont plan on repainting soon, dont do it). To get around the
weel nut problem, go to a wreckers and look through a bucket of old tyre bolts. Find some that are have a long shank that actually goes inside the hole in the wheel. These then will lock
the spacer in place.
Mely
|
|
