|
|
| Re: can i use a14/a15 cam sharft on a12 motor? |
Subject: Re: can i use a14/a15 cam sharft on a12 motor?
by Dodgeman on 2011/5/21 15:49:49
As usual, David is right, the later cam [1974 onward, any A series version] will work in the early [front distributor] block if the standard fuel pump position is blocked off.
The reverse will not work however. [early cam in later engine]
All 1974 & later A series cams are directly interchangeable but the timing specs vary a little bit depending on engine model & year model.
|
|
