|
Re: BEWARE OF MONOTORQUE HEAD GASKETS!!! | Subject: Re: BEWARE OF MONOTORQUE HEAD GASKETS!!! by Fandatstick on 2011/11/17 10:32:19
Quote: fredeuce wrote: Last night we checked the tension on the head bolts and that was quite surprising. All of them torqued down quite a lot. They all went down around 45-60 degrees to reach the manufactures spec of 45ft lb which is what I originally set them at when the motor was assembled.
Hopefully the head hasn't gone soft/annealed (due to overheating) and caused this..
|
|