|
|
| Re: Another issue!!!!! Man |
Subject: Re: Another issue!!!!! Man
by Rusty-Wrench on 2012/1/4 7:41:25
Quote:started up this morning the tap was still there
These A motors [pushrod] if ran with blown head gasket, poor oil condition etc, will cause the rockers to gall on the shaft.
Pretty simple to take apart and inspect.
IF you have a galled rocker, just remove the metal from the shaft, the rocker will usually give up the metal, and crocus cloth off the shaft.
You can file the most of it, but Do Not put file marks on the rocker shaft.
Rusty Wrench
|
|
