|
|
| Re: wiring loom, |
Subject: Re: wiring loom,
by Hyperslide on 2012/10/17 12:55:33
I am in the process of partially rewiring a project from another manufacturer (so won't be mentioned on this forum) and have found most of my dramas being to faulty earths either through lack of sufficient bare-metal contact with terminals or simply because I un-did one and didn't re-attach it.
If your stumped then use a multi-meter (M-M) and trace power from the battery to ignition, starter motor as mentioned and fuse box. Then maybe check Earths for broken wires within the sleeves. A decent M-M will be able to send a signal through the wire. Sorry if this is obvious stuff...
Good luck.
|
|
