|
|
| Which new (or good used) dizz should I buy? |
Subject: Which new (or good used) dizz should I buy?
by 58custom on 2017/3/19 23:33:11
Folks,
I am interested in replacing the dizz in my A15. It is a early 80s electronic unit with the matchbox module on the side. I would like to continue to use an electronic dizz but type is not a problem, I will change the wiring to it as required. Also would be interested in a compatible coil. Interested in what the forum thinks would be the preferred options.
The advance cure should be adjustable or perhaps already recurved.
Engine specs:
A15 short block
H89 head port matched to a GX intake, with GX valve springs
Dual HIF4 SU carbs
Pretty much stock compression (USA market H95-style dished pistons)
Cam: Delta regrind, 262D, .425 lift at valve
5 speed trans
It's in an MG Midget (Austin Healey Sprite). 3.7 rear end, about 1600 lbs (725kg)
|
|
