|
|
| getting header to fit |
Subject: getting header to fit
by mperdue on 2005/3/28 6:10:59
Trying to fit the header I bought from Feral at DatRats. He told me it would interfere and would need to be adjusted but I'm not sure how to do it. IN the pic below there's a black mark which is where it hits the transmission (doesn't hit the gearbox like I thought it would) - which is kinda weird because I thought the LHD and RHD blocks and trannys were the same. On well, anyway right at that mark it probably needs about 1/4" to 1/2" to fix the problem. Shoudl I just hammer that spot in - or will that kill flow in that tube? If not, how would I go about fixing this? I don't know how the whole cluster of tubes coudl be bent all together without breaking something, and it's not possible to bend them one at a time. Well anyway I appreciate any suggestions.
michael
|
|
![Open in new window](javascript:CaricaFoto("http://www.datsunprojects.org/mps210/mps210/DSCN5114sm.JPG");)