|
|
| Re: HELP!! Ca18det owners |
Subject: Re: HELP!! Ca18det owners
by dattodude on 2004/1/2 11:29:30
Make it yourself with a 3 inch mandrel bend. The regular sized turbo outlet + wastegate section = 3 inch circumference (Could have been 3.5 inch - Please measure it on the standard dump pipe's internal diameter).
Buy the steel flange from a place like Liverpool Exhausts in Sydney. Unless you are running a big GT turbo, don't bother you won't see any benefit, use the standard one, or use a SR20DET one, they fit better in a 1200.
Only get a custom dump pipe if you need it to help clear steering, or if you are running a custom manifold, and would like something less than a 90 degree bend.
Making it yourself will cost about $60.
Cheers,
Chris.
|
|
