|
|
| Correct 32/36 DGV Weber Jet Sizes |
Subject: Correct 32/36 DGV Weber Jet Sizes
by anb008 on 2004/2/24 2:19:25
Hi Guys...
I realise that the Heading for this post may appear a little ambiguous, but I've read the countless number of posts from people asking what are the best jet sizes to use in a DGV fitted to an A series.
Now I am the FIRST to admit that factors vary between individual engines and that no two motors are EXACTLY the same, but I figure that posting these sizes will at least be a step in the right direction (If one person is helped out by this post then hasn't it done it's job?).
I've just had the carb rejetted and dyno'ed. These new jet settings are on my standard A12 and I've been informed they will also work fine on my 40 thou O/bore A14 currently being built (with std cam). Such is the versatility of the DGV I guess...
Anyway, I hope this helps some people out:
Primary mentioned first, then Sec...
Air Correction: 175/145
Fuel: 120/145
Emulsion Tube: F66/F66
Choke Tube: 3.5/4.5
Idle: 50/55
Have Fun Guys...
Anton.
|
|
