|
|
| Re: 120Y Wheel/ Tyre Upgrade |
Subject: Re: 120Y Wheel/ Tyre Upgrade
by anb008 on 2004/7/3 17:36:24
Another update !!! it seems it is easy to get caught out with the Stanza SSS rims... or rather the 120Y hub...It appears that there were two types of hub used with 120Y's. On earlier models, the diameter of the part where the wheel locates and rests on is smaller that later models, that and anoffset of 105mm from rim face to the rear edge was 105mm. Consequently, the SSS rims didn't really fit unless you used spacers with longer studs, or you machined the rims...
so Here is the solution: find a set of rims with an offset of 90mm and a hub hole diameter of 80mm. Doing so will allow you to fit the rim on without ANY problems an no requirements for spacers, etc. An example in Australia of a rims that meets these requirements is the "Spitfire" at performancewheels.com.au (see Classic section)
I'll post the pics once fitted to the car.
|
|
