|
Re: Will a B-210 5-speed fit in a 1200? | Subject: Re: Will a B-210 5-speed fit in a 1200? by ang94541 on 2001/2/1 4:38:00
Ive used both styles of 5spds and they mount up the same way. You should buy a clutch disk for a B210 because i think the splines on the input shaft are different. Anyways, i had trouble with the reverse switch. It sticks out too far. So i plugged the hole with a bolt and sealer. Apparently the trans tunnel on automatic cars is bigger and it may clear. Also, i made the rear mount out of a plate of steel. The mount on the transmission and the mounting tabs on the body line up on the same horizontal plane. I cut the plate in a horseshoe shape, drilled holes and used a old innertube as a vibration insulator. It worked great. NOTE: this is basically a solid mount. The engine mounts are rubber. I dont know if this has any adverse effects on the transmission. Twisting,etc.
|
|