|
Re: VN Disk Brake Conversion | Subject: Re: VN Disk Brake Conversion by tappet on 2006/9/6 22:17:46
i used a series 3 bluebird strut and the vl turbo disks bolt straight on. u just have to remove the rubber dust cap from the inner bearing on the discs..
then all u have to do is make up a bracket for ur calipers to fit... u can use the 1200 lca's and steering arms if u get a spacing ring made up to locate the bottom of the strut to the smaller steering arm.. the bolt spacing should be exactly the same...
|
|