|
Re: regraphing distributor | Subject: Re: regraphing distributor by utheremate on 2007/6/6 6:47:19
there is no point playing with weights and springs till you know where you are going with your curve
first you need to know what duration your cam is to get your static advance and idle rpm settings 270=10/12@600/700rpm 280=12/14@900/1100rpm 290=14/16@1000/1200rpm 300=16/19@1100/1400rpm
then you need to estimate your total advance wich is relative to your combustion chamber (has to do with burn rate)
open wedge=36 to 38 deg heart shaped=34 to 35 deg closed chamber=38 to 40 deg
then you need a distributer recurving machine to spin the dissy till you get it advancing at your requirments
|
|