|
Re: IRS Ute Conversion (now with Pics) | Subject: Re: IRS Ute Conversion (now with Pics) by sssute on 2009/3/17 12:15:10
Some current photos.
The top photo shows the new curved top arms, and the adaptor bracket thet mounts the coil-over the the original s14 shock mount. I have made it with a pillow ball in it to allow for the angle deflecton with suspention travel. The s14 rear top arm normally is in front of the strut, but i have gone around the rear to give more clearance.
The second photo shows the ally coil-over adapter.
Third photo is the new arms i have made, they will have rod ends in the ends when they finally arrive.
The last shot is the upper mount, i have used part of our adjustable camber tops and recessed them into the tray. They are only tacked in at the moment, and i still have to make the support bracing to strengthen the mounting pionts.
The ride hight will be nice and low, i have a couple of sets of new wheels (5 stud) 15 inch for my track tyres 195/50/15 and 16 inch for road tyres 205/40/16. It works out that the outside diameter is the same, so there will be no clearance issues.
|
|