|
|
| Re: will a15 head fit a12 |
Subject: Re: will a15 head fit a12
by junior on 2009/9/10 16:15:00
Might have to do what I did with mine, put the A12 gasket on the A15 head and mark the oil hole that feeds to your rockers and then drill a 45 angle hole from the bottom of the head towards the hole where the head bolt goes threw. I did this swap to mine and didn't have lubrication to my rockers until I noticed that the A12 doesn't lubricate the rockers like the A13,A14 & A15 does. I drilled the hole and it took care the problem for me. Good Luck.
|
|
