|
|
| Re: Weak Brake Pedal |
Subject: Re: Weak Brake Pedal
by WhiteSedan on 2010/5/26 13:27:07
There is a residual valve in the master cylinder for the front brakes, you need to remove it from where the front brake line screws into the brake master, this doesnt sound like your main issue but is essential, i think you maybe need to bleed again, bench bleed your master then bleed longest lines first to shortest lines, wind on your rear drums tight before you do this and re-adjust afterwards. You do not need a booster that only aids in brake feel but is required if you need to engineer.
Pic here is for rear line but same goes for front on a ex-drum brake setup, its the little rubber valve there.
Who said to use the stanza stuff, its a pretty nasty setup.
|
|
![Open in new window](javascript:CaricaFoto("http://ozdat.com/members/uploads/mc_close_up.jpg");)