|
|
| Re: Can I use a 56 clutch release lever with a 60 gearbox? |
Subject: Re: Can I use a 56 clutch release lever with a 60 gearbox?
by B110SSS on 2012/6/18 20:28:28
Hi DD,
Sorry I should have posted some pics up, been a bit slack there.
What I found when I installed the 60 series box was that the 56 clutch fork is fine but we just couldn't get the clutch adjustment quite correct. The solution was to unbolt the pedestal that the lever pivots on and put 3 1.5 ( probably 2 would suffice ) washers in then bolt it back up to bring it out 5-6 mm and that did the trick nicely.
Cheers
Dave
|
|
