|
|
| Re: how i upgraded suspension and brakes |
Subject: Re: how i upgraded suspension and brakes
by benny on 2002/7/2 2:11:39
quite a bit of machining. the rotors are mounted to the back of vanette hubs as they have the correct offset, 4 stud and use the same wheel bearings ( but not oil seal). make sure the stuts are "armstrong" as they have the larger stub axle. (It should be stamped on the strut tube).
A bracket needs to be made to mount the calipers (I used 8mm, grade 250 plate steel) as the strut mounting points are 90mm centre to centre and the calipers mounting points are 100mm centre to centre. As well as using high tensile (8.8) bolts.
|
|
