|
|
| S13 Brake Conversion Problem |
Subject: S13 Brake Conversion Problem
by Elrich11 on 2014/1/18 0:22:37
Hi all, I am currently doing the S13 brake conversion on the standard 1200 struts. I have a bit of a problem with the caliper not sitting in the correct position. I am using the adaptors from Datgx with 250mm rotors and CA18DET calipers.
I know Datgx has sold plenty of these so just seeing what I might be doing wrong? Has anyone had a similar problem before? I am not sure if the adaptors are to suit the larger rotors?
I am using the stock disk strut (late model '85) with drum hubs (I have spaced the adaptor for now but will mill a recess for the caliper to accomodate the offset in hub)
I have tried flipping them, swapping adaptors / calipers from left to right, still getting the same result. Any suggestions will be appreciated. I don't mind if I need different rotors as I will be replacing everything once I figure out how it is all going to work. Thanks.
|
|
