|
|
| Re: PCV with weber manifold? |
Subject: Re: PCV with weber manifold?
by lamb_daiquiri on 2014/9/1 9:28:26
Here's a pic of the barb in the Throttle body, it is a 3.5mm bore, checked with the verniers.
You can also see the 4 into 1 tree in the pic, there's a check valve inline between there and the block breather. It looks a little rough but it's a work in progress. I was going to add an adjustable restrictor to control idle but it wasn't necessary, 3.5mm diameter per port worked out pretty good.
|
|
