|
|
| Re: Carb/Distributer joint help needed |
Subject: Re: Carb/Distributer joint help needed
by a12datto120y on 2014/9/28 10:32:11
I just read that you have used a ebay/chinese carby
this is the same thing i am running and actualy runs very good on my a12 i took my power valve out and gave it a slight polish as mine was stuck in one position.
also the top gasket in mine was kinda cheap and fell apart as i took the top cover of so i replaced it with a spare i had.
i also changed all the jets using the genuine hitachi jets from my old carby as i felt that maybe the chinese jet sizes could be slightly off but they looked okay from just looking at them
|
|
