|
Re: seems drastic but curious if this will help... | Subject: Re: seems drastic but curious if this will help... by ddgonzal on 2019/8/13 19:34:20
Ive seen guys replace the roof. They cut the pillars about 1/2 way like this, then weld the replacement on
KB110
If you do this, support the body on blocks in many places, and measure the pillar distances before you cut. Then make sure it's still the same distance before you weld on the replacement. If not careful the glass won't fit
Nissan sold the top panel alone which means you'd have to unpick the spot welds from the pillars
|
|