|
|
| Re: Fitting RX7 calipers to 1200/120Y struts |
Subject: Re: Fitting RX7 calipers to 1200/120Y struts
by ddgonzal on 2016/1/5 21:06:29
Yes. The key is to use a smaller disc rotor than the RX7 rotor. RX7 4-pots normally use 276 mm discs, same diameter as the Verada/Diamante discs all of which normally take 15" rims.
The question is what discs to use?
If you were to put say Stanza/Sunny 245 mm discs on, it could fit under some 13" wheels. To fit the Stanza discs is fairly easy, however, they are only 10 mm thick, while the 4-pots are designed for 22 mm discs.
|
|
