|
|
| Re: A15 piston-to-bore clearance |
Subject: Re: A15 piston-to-bore clearance
by ddgonzal on 2016/7/22 6:32:33
It's OK to move pistons around, they should all four be the same
But from another A15, the pistons may differ. There were at least three different pistons designs used by A15. CC the dish to see if they are the same, then weight the piston to see if they are the same manufacture
After moving them around the engine should be re-balanced except if the pistons weigh exactly the same
|
|
